欢迎浏览济南除甲醛公司,主要业务济南空气检测治理,济南装修污染治理,甲醛处理.

当前位置:首页 - 新闻资讯 > 知识 常见问题   行业新闻   知识   空气治理   项目优势   材料分析  
怎么才能保证甲醛检测的准确性?
来源:http://www.kqjczl.cn    添加日期:2019-08-15 15:40:46    浏览次数:0
  室外雾霾污染持续增加,所以大多数人不会频繁地在室内通风,但它会使室内装修污染越来越严重。甲醛检测已经成为一个热门话题,人们如何知道甲醛检测的准确性?
  Outdoor haze pollution continues to increase, so most people will not ventilate indoors frequently, but it will make indoor decoration pollution more and more serious. Formaldehyde detection has become a hot topic. How do people know the accuracy of formaldehyde detection?
  如何保证甲醛检测的准确性?
  How to ensure the accuracy of formaldehyde detection?
  1. 甲醛检测仪器的基本原理:基于有机化学基本原理的甲醛检测仪器相对客观、准确,电子设备的感应受传感技术的影响。
  1. The basic principle of formaldehyde detection instrument: formaldehyde detection instrument based on the basic principle of organic chemistry is relatively objective and accurate, and the induction of electronic equipment is influenced by sensing technology.
  2. 甲醛检测环境:检测室内所有正常空气质量时,门窗应关闭,家具柜、柜应关闭。如窗户关闭而家具柜打开,甲醛检测结果均通过正常高的室内空气质量。甲醛在培养基中的浓度。
  2. Formaldehyde detection environment: When testing all normal indoor air quality, doors and windows should be closed, furniture cabinets and cabinets should be closed. If the window closes and the furniture cabinet opens, the formaldehyde test results pass the normal high indoor air quality. The concentration of formaldehyde in the medium.
  3.甲醛检测温度:规范中没有明确规定。只需要正常的自然环境(冬季16-24℃,夏季22-28℃)。当温度过低时,室内甲醛蒸发会很低。
  3. Temperature of formaldehyde detection: There is no explicit stipulation in the specification. It only needs normal natural environment (16-24 C in winter and 22-28 C in summer). When the temperature is too low, indoor formaldehyde evaporation will be very low.
济南空气检测治理
  4. 关闭时间:按《工业建设项目室内空气污染控制标准》GB?《50325-2007(2013年版)条例》规定装修的甲醛浓度值不高于0.08m3,适用于房地产开发商环境污染工程建设新项目的自然环境。根据《室内空气污染规范》GB/ t18883-2002,规定关闭13小时,装修甲醛浓度值不高于0.5m3。本规范是指《世界卫生组织装修甲醛浓度值测定标准》,是对居住小区居民身心健康的较低标准。封闭13小时会使室内空气质量中的甲醛浓度超过稳定的平衡,即室内空气质量中甲醛的饱和,无法在1小时内准确测量服装、食品和交通条件下室内甲醛的浓度值。
  4. Closing time: According to "Standards for Indoor Air Pollution Control of Industrial Construction Projects" GB? Regulations 50325-2007 (2013 edition) stipulate that the formaldehyde concentration value of decoration is not higher than 0.08m3, which is suitable for the natural environment of new projects of environmental pollution construction of real estate developers. According to GB/t18883-2002, the concentration of formaldehyde in decoration should not be higher than 0.5m3 after 13 hours'closure. This code refers to the World Health Organization Standard for Determining the Concentration of Formaldehyde in Decoration, which is a lower standard for the physical and mental health of residents in residential areas. Closed for 13 hours will make the concentration of formaldehyde in indoor air quality exceed the stable balance, that is, the saturation of formaldehyde in indoor air quality, which can not accurately measure the concentration of indoor formaldehyde in clothing, food and traffic conditions in an hour.
上一篇:环境保护政策的出台有利于进一步发展!
下一篇:装修中甲醛含量比较高的材料!